ZeroTrace Mobile
TraceNet mesh
Link your ZeroTrace devices into a passphrase-gated Bluetooth mesh, see the whole fleet on one screen, run synchronized light shows, and read each device's About panel.
TraceNet links your ZeroTrace devices into a Bluetooth mesh and shows the whole fleet on one screen. It is reachable from the TraceNet tab on any connected device.
TraceNet mesh
Every agent in the mesh is listed with its name, signal, uptime, and a colour-coded status: idle, running, stale, offline, or "this one" for the device you are connected through.
- Passphrase-gated: only your devices discover each other. Set a shared passphrase and the mesh stays private.
- Live join / leave: devices appearing and dropping out stream in live.
- One-tap Identify: when you have a rack of identical units, Identify blinks a specific device's LEDs so you can physically pick it out.
| Detail | |
|---|---|
| Fleet | name, signal, uptime, colour-coded status, live join / leave |
| Find it | passphrase-gated, one-tap Identify blinks a unit's LEDs |
Light shows
On top of the mesh sits synchronized LED light shows. Pick a pattern, colour, speed, and duration and fire it across every agent at once, perfectly in sync, or stop them all instantly.
| Detail | |
|---|---|
| Controls | pattern, colour, speed, duration |
| Sync | fire across the whole mesh at once, stop instantly |
It is equal parts demo flourish and a practical way to watch your whole fleet respond as one.
Device About
Each device has a read-only About panel, the first place to look when you want to know exactly what you are holding.
| Shows | |
|---|---|
| Identity | name, type, product, serial, hardware ID, and licensed status |
| Health | firmware version and type, plus live diagnostics, current mode, active sub-devices, and free memory |
Pair the mesh with the Executor's fleet broadcast to run one HID script across every device in your TraceNet at once.